Unless you have a relatively late model vehicle that shipped with premium sound, it’s highly unlikely that the factory speakers in your vehicle will be up to the task of providing top-notch sound quality.
So, Whether your car speakers are starting to wear out due to age and use, or they weren’t ever that great to begin with, replacing them with a set of aftermarket speakers is one of the most budget-friendly ways to experience a better overall sound quality in your car.
Component car speakers are the way to go if you’re looking for premium sound, much better soundstage and imaging. That said, let’s take a look at some of the best 6.5 component speakers on the market.
What are Component Car Speakers
Conventional coaxial speakers, whether factory-installed or aftermarket consist of the woofer and tweeter combined into speaker. It’s a convenient, easy way to get great sound from a single speaker opening, but the design of the woofer and tweeter are both compromised in this arrangement which leaves a lot to be desired. That’s the reason why we recommend component speaker systems for serious audiophiles.
Component car speakers on the other hand separate tweeters and woofers which allows for a better overall sound quality. They add in an extra component called the crossover which allows these two drivers to do their job better by limiting the frequency range each driver must accurately reproduce.
Component car speakers bit difficult to install than coaxial speakers, but once installed, you will be GUARANTEED years of enjoyment.
Best 6.5 Component Car Speakers Reviews
- 6-1/2″ polypropylene woofer cone with rubber surround
- 3/4″ silk dome tweeter
- External 2-way crossover
- IP65 rated – dirt and water resistant speakers
- Tested to withstand salt-fog, UV and humidity
- Made from non-resonant materials for clear highs, mids and lows
- Dynamic Balance (DB) Technology
- Polypropylene UV tolerant cone
- Waterproof inner and outer surround
- 0.75″ shallow tweeter design
|Frequency range||35-23,000 Hz|
These speakers were designed with sound quality in mind. They offer the right mix of sound reproduction with an accurate, balanced frequency response. They deliver a deep, refined bass that doesn’t overwhelm, as well as smooth highs that don’t pierce the eardrums.
Polk Audio DB6502 are some of the best 6.5 component speakers on the market, all things considered. They’re featured with 6-1/2″ polypropylene woofer cone supported with durable rubber surround for solid playback and resilience under the environmental stress that comes with being mounted in your car doors.
Additionally, these speakers feature 3/4″ silk dome tweeters delivers smooth highs and incredible sonic detail. The included external crossover network keeps the highs and lows flowing to the proper component for seamless performance.
The Polk Audio DB6502 component speakers are rated for a sensitivity rating of 92 dB which makes them quite efficient. They can handle an outrageous amount of power on continuous basis (100 watts RMS).
That said, these speakers will do running off your aftermarket headunit, but they’ll really shine when paired to an external amplifier.
- 6-1/2″ carbon-injected Plus One™ woofer cone
- Butyl Rubber speaker surround
- 3/4″ edge-driven silk dome tweeter
- Patented Plus One woofer-cone technology increased output with no extra power
- Three-ohm voice coils allow compensation for added resistance by thin factory speaker wiring
- Adjustable 0 or +3dB tweeter level attenuation
- High-temperature voice coil
- Vented magnet motor structure cools the voice coil
- Fiberglass-reinforced Plastic (FRP) basket
- External 12dB/octave crossover filters remove harmful frequencies
|Frequency range||53-21,000 Hz|
The GTO609C component speakers from JBL are some of the most popular 6.5 component car speakers around. With their impressive sound quality and immersive audio, they are undoubtedly the best 6.5 component car speaker solution available at this price point.
JBL GTO609C speakers sound fantastic to say the least. They offer clear audio and good bass response thanks to the 6-1/2″ carbon-injected woofer cones designed with JBL’s unique Plus One technique which expands the diaphragm area of the cone to provide better low-frequency response.
As for the highs, these speakers use 3/4″ edge-driven silk dome tweeters which ensure a rich experience in the upper frequencies, defined by clear, sharp highs that will cut through big bass and road noise.
These tweeters feature adjustable level control that you can use to tweak your tweeters to your taste, so the GTO609C speakers’ sound is customized to your car.
As with all component speakers, the JBL GTO609C come with dedicated crossover networks which allows for seemless, well balanced sound output.
JBL GTO609C component speakers are quite efficient. They’re rated for a sensivity rating of 93dB, so they’ll sound great when powered by an aftermarket stereo. But if you want to blast these babies, they’ll handle up to 90 watts RMS from an external amplifier.
These JBL speakers offer slightly lower impedance load (3 ohms) than regular car speakers, so they’ll safely draw a little more power from your car stereo, yielding big volume even with low-powered factory headunit.
- 6-1/2″ Plus One+ glass-fiber woofer with hi-roll rubber surround
- Adapter rings included for 6-1/2″ openings
- 3/4″ edge-driven soft dome tweeter
- 2-way external crossover network
- 2-ohm impedance
- Tweeter adjustment circuits (0, +3 dB)
|Frequency range||45-35,000 Hz|
Without a doubt the Infinity Kappa 60.11cs are an amazing sounding set of speakers, which overwhelm most, if not all full-range speakers out there in every regard except one. No prizes for guessing which one. Price. Everything sounds good through these speakers, and the lows, mids and highs are all delivered precisely without distortion. That said, if you’re looking for more bass, you might want to consider a subwoofer. That’s not to say the Infinity Kappa 60.11cs lacks bass response – far from it – however, the bass acts as an accompaniment rather than the main attraction.
Infinity Kappa 60.11cs speakers feature 6-1/2″ Plus One+ glass-fiber woofers supported with hi-roll rubber surround. The Glass fiber that these woofers are made of is a great material. It weighs less than traditional materials, so you don’t need a ton of power to make these woofers sound great. Plus, it can hold its shape at high volume levels, so you still get punchy and defined bass even when the power’s cranked up.
As with JBL GTO609C (listed above), Infinity Kappa 60.11cs speakers’ woofers are built with Infinity’s Plus One+ woofer technology which extends the cone right up to the edge of the basket, giving you more cone surface area than with most comparable speakers. And as you might already know, a bigger cone means more bass to complement the superior high-frequency response.
Speaking of highs, these speakers are featured with 3/4″ edge-driven soft dome tweeters which can handle more power and deliver smooth response way down into midrange frequencies. That being said, You’ll hear every musical details and a more clearly defined soundstage where you can picture the placement of every musical instrument.
All in all, the Infinity Kappa 60.11cs are some of the best 6.5 component speakers under $200 that you can buy. These 2-ohm speakers are sensitive enough that you can power them with an aftermarket stereo, but for optimal results, pair them up to an outboard amp — they can handle up to 90 watts RMS.
- Multi-layer hybrid fiber woofer with Santoprene® rubber surround
- 1″ textile ring-dome tweeter
- External crossovers — 12 dB/octave (high -pass) and 6 dB/octave (low-pass) crossover points
- 7-level tweeter adjustment
|Frequency range||65-29,000 Hz|
If you like to play your music loud with very minimal distortion, These speakers are for you. Alpine have built their type-R speakers for people who like to turn it up.
The Alpine Type-R SPR-60C component system features 6-1/2″ multi-layer hybrid fiber woofers supported with Santoprene® rubber surround. These woofers will deliver great bass response. Alpine did a great job at adapting the specially ridged surround, originally developed for their subs, to these speakers, which allows for for consistent, extended cone movement that pushes more air.
It must be noted that the bass that these speakers can deliver isn’t by anymeans comparable to that of a subwoofer. Although the lows are not as prominent, they still kick hard, and would suit those of you looking for more subtle bass solution.
These speakers only begin to slighly struggle when faced with some really bass-heavy tracks. If you’re a basshead, I’m afraid that’s going to be an issue for you so it’s better to consider adding a subwoofer to your car sound system.
Additionally, these speakers are featured with 1″ silk dome tweeters which produce smooth, bright highs that will bring out your music’s detail and depth with no shrillnes. These tweeters come with EQ ring which improves the tweeter’s dispersion characteristics, providing excellent off-axis response.
The Alpine SPR-60C speakers can handle up to 110 watts of power RMS. That’s a ton of power. So, it’s better to hook them up to an external amplifier.
As for the downsides, it’s really difficult to think of any. If anything, I’d say that these speakers’ sensitivity rating of 88dB is slightly low compared to most 6.5 component speakers we listed here.
- Injection Molded, Mica-filled Polypropylene Cone
- Butyl rubber surround
- 3/4″ silk dome tweeter
- 1.00″ Voice Coil on Kapton® Former
- Flat, Symmetrical Roll Spider
- Ferrite Woofer Magnet
- 0.75″ Silk Dome Tweeter
- External crossover network with 3 tweeter levels (0, -2, +2 dB)
- Ferrofluid Cooling/Damping Neodymium Tweeter Magnet
- 4-ohm impedance
|Frequency range||59-22,000 Hz|
JL Audio C2-650 are some of the best 6.5 component car speakers under $200 that you can buy. They’re designed to deliver sparkling high-frequency detail, smooth mids and refined lows, thanks to their 3/4″ silk dome tweeters that deliver smooth, extended response, on and off axis, and 6-1/2″ woofers with rugged mineral-filled polypropylene cones. These woofers have a long linear excursion design can handle a ton of power without distortion.
Speaking of power, these babies can handle up to 100 watts of power on continuous basis and are rated for a sensitivity rating of 91dB.
The external crossovers that come with these speakers are compact and can be be mounted in shallow location (doors for example). They’re built with premium component parts, including Mylar® capacitors and segmented air-core inductors. These crossovers feature a tweeter protector, as well as 3-level tweeter control. So, make sure your tunes play smoothly across the whole musical spectrum.
- 6-1/2″ Plus One+ polypropylene woofer
- Hi-roll rubber surround
- 3/4″ edge-driven textile dome tweeter
- 1″ voice coil
- Starfish™ mounting brackets for easier tweeter installation in factory locations
- 2-way external crossover network (6 dB/octave)
- 3-ohm impedance for extra power
|Frequency range||53-21,000 Hz|
If you’re looking for an upgrade over your built-in speakers but don’t want to break the bank then the Infinity Primus PR6500cs speakers could be for you. They are the best sounding 6.5 component speakers under $100.
These cheap 6.5 component car speakers are featured with 6-1/2″ Plus One+ polypropylene woofers with hi-roll rubber surround which can deliver solid bass. Additionally, the separate 3/4″ edge-driven, textile dome tweeter broadcasts smooth high frequencies.
Additionally, the external crossover makes sure that both the woofer and tweeter get the right signals for well balanced sound.
These speakers feature a high sensitivity rating of 93dB and can handle up to 80 watts of power RMS. Once installed, they’ll make a night and day difference in sound quality. That said, cruising around town will be a more enjoyable experience as you get pulled into your favorite, great-sounding tunes.
Anatomy of a component speaker
Tweeters for the highs : Tweeters are meant to handle and reproduce the upper frequencies in your music such as vocals, guitars, horns and other high notes that make the music sparkle. They play a major role in making your music sounds as if it’s coming from all around you, rather than from your car doors or rear deck. That said, it’s highly recommended that you mount the tweeters as close to your ear level as possible. However, the tweeters should not be mounted far away from the woofers so that the different frequencies don’t reach your ears at different times.
Crossovers hide away : A crossover is an electronic device which acts as a traffic cop for the audio frequencies coming from your amp or headunit. Crossovers ensure that frequencies below a fixed point (lows) go to the woofers, and those above (highs) go to the tweeters. These small electronic devices can be mounted securely wherever there’s space in your doors or dash.
Woofers go down low : They’re meant to handle low frequencies such as notes from drums, a bass guitar or a tuba. They are usually mounted in your vehicle’s factory locations.
The 3 Major Benefits of Component Speakers
1- Better sound clarity
Thanks to the crossovers which split up the audio signal into two or more frequency ranges, so that the signals can be sent to the most suitable driver, the woofers and the tweeters are freed up to do more for their assigned frequencies. Well-built crossovers prevent each speaker from stretching to play frequencies it wasn’t really meant to handle, resulting in crisp, clear sound output.
2- Better sound stage
The best thing about component speakers is that you can mount each driver separetely which allows for better sound-staging. Think about it. By mounting the tweeters in the dash, A-pillars, or sail panels of your car, you’re raising the stage, which means your music will sound as if it’s coming from all around rather than from one single location. This puts you one step closer to a more authentic audio experience.
3- Better imaging
Obviously, component speakers are built with high quality materials. Combine that with their raised soundstage, tonal clarity frequency separation, and you get more accurate imaging.
Why should you use an amp to power component speakers
Undoubtedly, component car speakers are designed to handle higher amounts of power than their coaxial speaker counterparts. They’ll do pretty well running off an aftermarket headunit, but they’ll really come into their own when powered by an outboard amplifier.
If you don’t intend to add an external amplifier, then make sure the component speakers you would like to use have a high sensitivity rating and are rated to perform well on just stereo power.